Paver Sealing
Sealing for brick paver driveways and walkways after cleaning, to hold the colour and slow the growth coming back. Free estimates by text, phone or online.
See Paver Sealing
Concrete, brick pavers, sidewalks and curbing cleaned at 3000 to 4000 PSI. Hard surfaces only, where real pressure is the right tool.
Englewood driveways, walkways and pavers cleaned at 3000 to 4000 PSI. Green off the parts nobody drives on. Free estimates. Mr. Pressure Cleaning has worked Sarasota and Charlotte Counties for over a decade, out of North Port. Quoted online, by text or over the phone, never in person. Call (941) 257-8624.

You can read an Englewood driveway like a calendar. Where the tires go, the concrete stays lighter. Everywhere else, the centre strip, the outer edges, the parking pad nobody used, goes green and then black. Tires scrub a surface every single day, and a car that's been in a garage in Ohio since April scrubs nothing. That's why so many of these drives come back with two clean stripes down an otherwise dark slab, and why the pattern shows up here harder than it does in towns that stay full year round.
Concrete and brick get 3000 to 4000 PSI, which is real pressure on the surfaces built for it. The growth that blackens a driveway roots into the pores rather than sitting on top, so a light pass just polishes it and the stain is back within weeks. Full pressure takes it out. The same judgement keeps a maximum of 70 PSI on roofs and 900 to 1200 PSI on screens and walls. Matching pressure to surface is the entire job.
The stripe pattern is the giveaway, and it's worth understanding before you get quoted. A drive that looks half filthy is not half dirty. The whole slab has the same growth in it, the tracks just get scrubbed clean twice a day when somebody's home. That's also why the fix has to be the whole slab. Clean the dark parts only and you swap one two tone driveway for a different one.
Near the key and along the Placida Road side there's sand and crushed shell in the mix too. It blows across a drive, tracks in on shoes and tires, and packs into paver joints, and while sand doesn't stain anything it holds moisture down in the joint where growth lives. It rinses out. The green underneath is the part that needed the machine.
The walkways are where it stops being cosmetic. The path from the drive to the front door, the strip beside the lanai, the concrete around the pool deck. Those sit in shade, stay damp, and go slick before they look bad enough to bother anyone. On a house where somebody arrives after six months away with luggage in both hands, that's the surface worth doing first.
Englewood Isles, Old Englewood Village, Grove City, Overbrook Gardens, Boca Royale, Oyster Creek, Manasota Key.
Every surface we clean gets its own pressure. Roofs get a maximum of 70 PSI from a battery pump. Pool cage screens and house exteriors get 900 to 1200 PSI. Concrete, brick and stone get 3000 to 4000 PSI, because they're the surfaces built to take it.
That range matters on a driveway. The growth that turns concrete black doesn't sit on top, it roots into the pores. Light pressure skims the surface and leaves the roots behind, and the staining is back before you've put the hose away. Real pressure takes it out of the pores. On a tile roof or a screen, that much force would be damage. On concrete it's just the right tool.
If it's a hard surface at ground level, this is the service that covers it. The equipment and the pressure are the same whether the job is a two car driveway or a parking lot.
Residential and commercial. Same weather, same growth, same fix.
Brick pavers dull down grey, but the joints are where the growth really takes hold. Sand joints hold moisture, moisture feeds growth, and growth in the joints is what makes a paver walkway slick underfoot. Cleaning the paver faces and leaving the joints green is half a job, so we don't do it that way.
One thing this page doesn't cover: sealing. If you want the colour held and the growth slowed down after a clean, that's paver sealing, and it's its own service with its own page. Sealing follows cleaning, never the other way round. If your pavers are worth sealing we'll say so at the estimate, and if they're not we'll say that too.
Driveways and walkways run beside lawns and planting beds, which is exactly why some people put cleaning off. The fear isn't the dirt. It's losing the landscaping.
Here's what actually happens. Where a job calls for a cleaning mix, the mix is matched to the surface it's on. Afterward we remove the chemical by diluting it down so far it stops acting on anything. Dilution is the solution. If you have irrigation along the drive, run it before we arrive and for at least a week to 10 days after we leave, so nothing dies at the root. That step isn't an extra we mention in passing. It's the part we lead with.
A stained sidewalk in front of a business reads as neglect before a customer ever reaches the door. We clean commercial concrete on the same equipment as residential work: parking lots, storefront sidewalks, curbing. Quoted the same way too. Online, by text or over the phone, free, before anything starts.
Nobody books a driveway clean the day it starts greying. They call when something forces the issue. These are the usual reasons:
Whatever brought you here, the estimate works the same way. Send a photo of the surface, or call and describe it, and Matt gives you a straight number back. Free, no obligation.
Matt answers his own phone. Not a call centre, not a callback three days later. The person who picks up is the person doing the work, and he shows up when he says he will.
Family owned and operated out of North Port, working the Gulf Coast for over a decade. If it's black or green, we will make it clean.
Before
After
Before
After
Before
After4.7 stars from 58 Google reviews.
Very happy with the job that was done on my driveway. It looks great! Thank you so much. I will call again.
Beverly Bearton, Google review
No. Hard surfaces are the one place 3000 to 4000 PSI belongs. Concrete, brick and stone are built to take it, and the growth rooted in their pores needs it. The surfaces that can't take that force never see it from us. Roofs get a maximum of 70 PSI and screens get soft wash pressure. Matching the pressure to the surface is the whole job.
Usually the same organic growth that streaks roofs around here, fed by heat, humidity and the rainy season. It looks permanent. It isn't. High pressure cleans it out of the pores of the concrete instead of skimming the top. If what you're looking at turns out to be something other than growth, send Matt a photo and he'll tell you straight.
That's the fear that stops most people booking, so here's exactly what happens. Any cleaning mix is matched to the surface it's on. Afterward we dilute the chemical down so far it stops acting on anything. Dilution is the solution. If you have irrigation near the drive, run it before we arrive and for a week to 10 days after we leave.
Sometimes. Sealing holds the colour and slows the growth coming back, and it only ever follows a cleaning, never replaces one. It's a separate service with its own page. If sealing makes sense for your pavers, Matt will say so at the estimate. If it doesn't, he'll say that too.
Results typically stay clean about a year. It's the same Florida weather afterward as before, so the growth does come back eventually. When the surface starts to grey again, call and we'll clean it again.
Every job is quoted free, online, by text or over the phone. Size and how deep the staining has set both move the number, so send a photo of the driveway and Matt sends a straight number back. No waiting on an appointment window, and no obligation either way.
Because nothing has been driving on it. Tires scrub the concrete they roll over, so the tracks stay lighter while the centre strip and the edges grow undisturbed. On a house that sits closed for half the year the effect is obvious. It also means the slab is dirtier than it looks, which is why the whole thing gets cleaned rather than the parts that show.
It's a passenger, not the problem. Sand doesn't stain concrete, but it packs down into paver joints and holds moisture there, which suits the growth perfectly. It rinses out during the cleaning. What actually needs full pressure is the black in the pores of the concrete and the green in the joints underneath the sand.
As soon as it's done. Nothing is being applied that has to cure, it's water, pressure and a mix that gets diluted right down afterward, so the surface is just wet. Sealing is the job that needs cure time, and that's a separate service on its own page. If you're having the drive cleaned before you seal it, that order is correct. Sealing always follows cleaning.
Based in North Port, working roughly 50 miles either side of I-75. Same services, same Florida weather, in every town on the list.
Sealing for brick paver driveways and walkways after cleaning, to hold the colour and slow the growth coming back. Free estimates by text, phone or online.
See Paver Sealing
Whole exterior soft wash at 900 to 1200 PSI. Stucco, siding, soffit, fascia and the outside of your gutters, with the chemical diluted down after the rinse.
See House Washing
Screen enclosure and the deck under it, cleaned at 900 to 1200 PSI soft wash pressure so the screens and frames are not damaged.
See Pool Cage & DeckFree estimates, no obligation. Send a photo and get a real number back, online, by text or over the phone.