Paver Sealing
Sealing for brick paver driveways and walkways after cleaning, to hold the colour and slow the growth coming back. Free estimates by text, phone or online.
See Paver Sealing
Concrete, brick pavers, sidewalks and curbing cleaned at 3000 to 4000 PSI. Hard surfaces only, where real pressure is the right tool.
Concrete drives, paver walks and sidewalks in North Port cleaned at 3000 to 4000 PSI. Growth out of the joints too. Free estimates. Mr. Pressure Cleaning has worked Sarasota County for over a decade and is based right here. Quoted online, by text or over the phone, never in person. Call (941) 257-8624.

North Port has two kinds of driveway and they get dirty in two different ways. The older platted lots run long concrete driveways out to the street, often under oak, and those go black in patches rather than all over. The newer master planned side is full of brick paver drives, paver walks and paver entries, where the faces dull down grey and the joints go green first. Different surface, same organism, same rainy season feeding it.
Both get 3000 to 4000 PSI. Concrete, brick and stone are the surfaces built to take real pressure, and the growth that blackens them roots into the pores instead of sitting on top, so skimming the surface just buys a few weeks. Full pressure takes it out. That's the same judgement that keeps a maximum of 70 PSI on roofs and 900 to 1200 PSI on screens and walls. Every surface gets the pressure that suits it, and concrete is the one that gets all of it.
On the old grid the shade map is the dirt map. Look at a long driveway out there and the black follows the canopy, heaviest under the drip line where water comes off the branches, lighter where the sun gets a few hours a day. The apron at the street usually stays cleanest because nothing hangs over it. That's also why cleaning half a slab looks worse than leaving it alone. One clean strip beside a stained one reads as a stripe, so the whole thing goes.
In the master planned communities it's joints. Paver sand holds moisture between every brick, and the moisture feeds growth down in the joint where a broom never reaches. That's the green you see from three feet away and never from the driver's seat. It's also where a paver walk turns slick underfoot, which matters more on the path from the drive to the front door than it does out on the driveway itself.
The rest is sidewalks. North Port has miles of them and most of these lots have one running across the front, plus the walk up to the entry. They collect the same growth as everything else and they're what a guest actually stands on. Roof, drive, walk and entry can all go on one quote, each surface cleaned at its own pressure, and that's usually the cheaper way to think about it than calling three times a year.
Wellen Park, Bobcat Trail, Heron Creek, Sabal Trace, Talon Bay, Lakeside Plantation, Warm Mineral Springs, North Port Estates.
Every surface we clean gets its own pressure. Roofs get a maximum of 70 PSI from a battery pump. Pool cage screens and house exteriors get 900 to 1200 PSI. Concrete, brick and stone get 3000 to 4000 PSI, because they're the surfaces built to take it.
That range matters on a driveway. The growth that turns concrete black doesn't sit on top, it roots into the pores. Light pressure skims the surface and leaves the roots behind, and the staining is back before you've put the hose away. Real pressure takes it out of the pores. On a tile roof or a screen, that much force would be damage. On concrete it's just the right tool.
If it's a hard surface at ground level, this is the service that covers it. The equipment and the pressure are the same whether the job is a two car driveway or a parking lot.
Residential and commercial. Same weather, same growth, same fix.
Brick pavers dull down grey, but the joints are where the growth really takes hold. Sand joints hold moisture, moisture feeds growth, and growth in the joints is what makes a paver walkway slick underfoot. Cleaning the paver faces and leaving the joints green is half a job, so we don't do it that way.
One thing this page doesn't cover: sealing. If you want the colour held and the growth slowed down after a clean, that's paver sealing, and it's its own service with its own page. Sealing follows cleaning, never the other way round. If your pavers are worth sealing we'll say so at the estimate, and if they're not we'll say that too.
Driveways and walkways run beside lawns and planting beds, which is exactly why some people put cleaning off. The fear isn't the dirt. It's losing the landscaping.
Here's what actually happens. Where a job calls for a cleaning mix, the mix is matched to the surface it's on. Afterward we remove the chemical by diluting it down so far it stops acting on anything. Dilution is the solution. If you have irrigation along the drive, run it before we arrive and for at least a week to 10 days after we leave, so nothing dies at the root. That step isn't an extra we mention in passing. It's the part we lead with.
A stained sidewalk in front of a business reads as neglect before a customer ever reaches the door. We clean commercial concrete on the same equipment as residential work: parking lots, storefront sidewalks, curbing. Quoted the same way too. Online, by text or over the phone, free, before anything starts.
Nobody books a driveway clean the day it starts greying. They call when something forces the issue. These are the usual reasons:
Whatever brought you here, the estimate works the same way. Send a photo of the surface, or call and describe it, and Matt gives you a straight number back. Free, no obligation.
Matt answers his own phone. Not a call centre, not a callback three days later. The person who picks up is the person doing the work, and he shows up when he says he will.
Family owned and operated out of North Port, working the Gulf Coast for over a decade. If it's black or green, we will make it clean.
Before
After
Before
After
Before
After4.7 stars from 58 Google reviews.
Very happy with the job that was done on my driveway. It looks great! Thank you so much. I will call again.
Beverly Bearton, Google review
No. Hard surfaces are the one place 3000 to 4000 PSI belongs. Concrete, brick and stone are built to take it, and the growth rooted in their pores needs it. The surfaces that can't take that force never see it from us. Roofs get a maximum of 70 PSI and screens get soft wash pressure. Matching the pressure to the surface is the whole job.
Usually the same organic growth that streaks roofs around here, fed by heat, humidity and the rainy season. It looks permanent. It isn't. High pressure cleans it out of the pores of the concrete instead of skimming the top. If what you're looking at turns out to be something other than growth, send Matt a photo and he'll tell you straight.
That's the fear that stops most people booking, so here's exactly what happens. Any cleaning mix is matched to the surface it's on. Afterward we dilute the chemical down so far it stops acting on anything. Dilution is the solution. If you have irrigation near the drive, run it before we arrive and for a week to 10 days after we leave.
Sometimes. Sealing holds the colour and slows the growth coming back, and it only ever follows a cleaning, never replaces one. It's a separate service with its own page. If sealing makes sense for your pavers, Matt will say so at the estimate. If it doesn't, he'll say that too.
Results typically stay clean about a year. It's the same Florida weather afterward as before, so the growth does come back eventually. When the surface starts to grey again, call and we'll clean it again.
Every job is quoted free, online, by text or over the phone. Size and how deep the staining has set both move the number, so send a photo of the driveway and Matt sends a straight number back. No waiting on an appointment window, and no obligation either way.
Yes, the whole slab. Cleaning only the stained sections leaves you with a clean patch against an older one, and that line is more obvious than the staining was. The concrete under the canopy takes more work than the open end, but it all gets done in the same visit and it all comes back to one colour.
That's most of the job on pavers. The faces come back easily. The growth living down in the sand joints is what makes the whole walk read green and what makes it slick when it's wet, so cleaning the brick and leaving the joints would be half a job. If your joint sand is already low, send a photo with the rest and Matt will tell you what he's looking at before anything gets scheduled.
Yes, and that's the normal ask here. They're two different pressures, a maximum of 70 PSI on the roof and 3000 to 4000 PSI on the concrete, but it's one visit and one free quote. Send photos of both, or call and describe them, and the whole property gets priced at once instead of in pieces.
Based in North Port, working roughly 50 miles either side of I-75. Same services, same Florida weather, in every town on the list.
Sealing for brick paver driveways and walkways after cleaning, to hold the colour and slow the growth coming back. Free estimates by text, phone or online.
See Paver Sealing
Whole exterior soft wash at 900 to 1200 PSI. Stucco, siding, soffit, fascia and the outside of your gutters, with the chemical diluted down after the rinse.
See House Washing
Screen enclosure and the deck under it, cleaned at 900 to 1200 PSI soft wash pressure so the screens and frames are not damaged.
See Pool Cage & DeckFree estimates, no obligation. Send a photo and get a real number back, online, by text or over the phone.