House Washing
Whole exterior soft wash at 900 to 1200 PSI. Stucco, siding, soffit, fascia and the outside of your gutters, with the chemical diluted down after the rinse.
See House Washing
Pool Cage and Deck Cleaning in Englewood, FL
Screen enclosure and the deck under it, cleaned at 900 to 1200 PSI soft wash pressure so the screens and frames are not damaged.
Who handles pool cage and deck cleaning in Englewood, FL?
Englewood pool cage screens, frames and decks cleaned at 900 to 1200 PSI. Six months of growth off in one visit. Mr. Pressure Cleaning has worked Sarasota and Charlotte Counties for over a decade, out of North Port. Estimates are free and quoted online, by text or over the phone, never in person. Call (941) 257-8624.
Englewood, FL
What does pool cage and deck cleaning in Englewood involve?
Nearly every one of these houses has a cage on the back of it, and a lot of them spend the summer alone. That combination is the whole story here. A screen enclosure sitting closed through the rainy season fogs grey, greens on the shaded panels, and by the time somebody slides the door open in the fall the deck underneath has gone slick as well. Nobody watched it happen, which is why it always feels like it happened all at once.
The whole enclosure gets 900 to 1200 PSI. Screens, aluminium frames and rails, and the deck under them, concrete or brick pavers, as one job. That's soft wash pressure, the same range that goes on soffit and fascia. It lifts the growth the mix has already killed and leaves the mesh in its splines. The 3000 to 4000 PSI that cleans a driveway never gets pointed at a screen, which is exactly how screens get torn by people who don't make that distinction.
- Screens, aluminium frames and the deck under them, one job
- Cleaned at 900 to 1200 PSI soft wash pressure, never high pressure
- The green film that makes a pool deck slippery washed off
- Surfactant based mixes matched to the surface, so chemistry does the work
- Chemical diluted down after until it stops acting on anything
- Free estimates by text, phone or online
Coming Back to a Green Cage
Six months is a long time in this climate. The panels that face the shade go first, the overhead collects whatever the trees drop and holds water against the mesh, and the frame picks up streaks where rain sheets off the top rail. Meanwhile the deck under it grows the same film as everything else. That film is the reason a pool deck gets slick, and around a pool something is always wet, so the deck is not the cosmetic half of this job.
Salt haze off Lemon Bay and Manasota Key stacks on top of the growth on the water side of town. It films the mesh, dulls the aluminium and takes the clarity out of the view through the screen, which is the part most owners actually notice before they notice any colour. It comes off in the same wash with the same mix. Living closer to the water changes how often the enclosure earns a clean, not how the clean is done.
On the older enclosures around here it's worth being straight about mesh. Soft wash pressure won't hurt sound screen, and most grey is dirt. But screen that has been up for twenty Gulf summers is old screen, and no wash makes it new. Send photos of the cage and you'll be told which panels will come back and which ones are past cleaning, before anything is scheduled.
- Screens, aluminium frames and rails at 900 to 1200 PSI, never driveway pressure
- Overhead panels that held six months of leaf drop and rain
- The deck underneath, concrete or brick pavers, where the slip risk lives
- Salt film off cages near Lemon Bay and Manasota Key
- Streaking down the frame where water sheets off the top rail
- A straight answer on older mesh before you commit to anything
Areas of Englewood we work in
Englewood Isles, Old Englewood Village, Grove City, Overbrook Gardens, Boca Royale, Oyster Creek, Manasota Key.
Why Your Screens Never See High Pressure
The question everyone asks first: will it tear my screens? Not at the pressure we use. Screens and frames get 900 to 1200 PSI, and that number is the answer. Enough to lift the algae, gentle enough to leave the mesh and the frame alone.
Every surface we clean gets its own pressure. Roofs get a maximum of 70 PSI from a battery pump. Concrete gets 3000 to 4000 PSI, because concrete is built for it. A screen is not concrete, so it never gets concrete's pressure. Getting that judgement right, surface by surface, is the job you're actually hiring.
What Gets Cleaned
The whole enclosure, not just the panels you look through. A cage that's clean at eye level and green overhead still reads dirty every time the sun comes through it.
Screens, frame and deck get quoted together as one job, online, by text or over the phone. Residential and commercial.
- Screen panels, walls and overhead
- Aluminium frames and rails
- The pool deck under it all, concrete or brick pavers
Grey Screens Are Usually Dirt, Not Age
Screen mesh fogs over with the same growth that streaks roofs here. Some of that grey is dirt and algae, and it washes off. Some of it is age, and no wash turns old mesh new.
You get a straight answer about which one you've got. Send Matt a photo of the enclosure and he'll tell you what cleaning will fix and what it won't, before you've committed to anything.
The Deck Is Half the Job
The deck under a cage collects the same growth as the screens, and down there it's a slip problem, not just a grey one. The film that turns a pool deck green is the same film that makes it slick when it's wet, and around a pool it's always wet somewhere.
Screens, frames and deck get cleaned as one job, whether the deck is concrete or brick pavers. A bright cage over a green deck is half a job, so we don't do halves.
The Cleaning Is Chemistry, Not Force
At soft wash pressure, the cleaning power comes from the mix, not the machine. We use surfactant based soap and degreaser mixes matched to each surface, so the growth lets go without the pressure doing damage.
Then the part that matters most. Pool cages sit in the middle of the landscaping, with planting beds right against the frame. We remove the chemical by diluting it down so far it stops acting on anything. Dilution is the solution. If you have irrigation around the cage, run it before we arrive and for at least a week to 10 days after we leave, so nothing dies at the root. That's the step we lead with, because losing the landscaping is the fear that actually stops people booking.
When People Call About a Cage
These are the calls that usually come in:
Whichever one is yours, it starts the same way. Send Matt a photo of the enclosure, or call, and he tells you what it needs. Free.
- Screens gone grey or green
- Streaks running down the aluminium frame
- A deck that's slick underfoot
- Company coming and the lanai looks tired
- Getting the house ready to list
Why People Call Mr. Pressure Cleaning
Matt answers his own phone, and he shows up when he says he will. The person quoting your cage is the person cleaning it.
Family owned and operated out of North Port, working the Gulf Coast for over a decade. If it's black or green, we will make it clean.
- Family owned, licensed and insured
- Over a decade on the Gulf Coast
- Matt answers his own phone
- Free estimates by text, phone or online
- 4.7 stars from 58 Google reviews
Straight Answers
What people ask about pool cage & deck in Englewood
Will pressure washing tear my pool screens?
Not at the pressure we use. Screens and frames get 900 to 1200 PSI, soft wash pressure, the same range we use on soffit and fascia. The 3000 to 4000 PSI that cleans a driveway never gets pointed at mesh. The pressure is matched to the surface on every job, and screens are the clearest case there is.
My screens are old. Can you still clean them?
Usually, because soft wash pressure is gentle by design. But old mesh is old mesh, and nobody should promise otherwise without seeing it. Send Matt a photo of the enclosure and he'll tell you straight what cleaning will fix, and whether any panel is too far gone to touch.
Do you clean the deck too, or just the screens?
Both, as one job. Screens, frames and the deck under them, concrete or brick pavers. The deck is where the slip risk lives, so leaving it out would miss the point.
Will the chemicals hurt the plants around my cage?
This is the step we lead with. The mix is matched to the surface, then removed by diluting it down so far it stops acting on anything. Dilution is the solution. If you have irrigation around the cage, run it before we arrive and for a week to 10 days after we leave. Losing the landscaping is the fear that stops most people booking, and this is the answer to it.
How often does a pool cage need cleaning?
Results typically stay clean about a year. Same heat, same humidity, so the growth comes back eventually. When the screens start going grey again, that's the time to call.
What does pool cage cleaning cost?
Every job is quoted free, online, by text or over the phone. Cage size, deck size and how far the growth has gone all move the number, so send a photo or two and Matt gives you a straight answer back. No waiting on an appointment window. No obligation.
We had it cleaned two years ago and it is green again. Are we doing something wrong?
No. Results typically stay clean about a year, and a closed up summer eats most of that on its own. Same heat, same humidity, same rain, and nobody there to rinse anything or notice it starting. Two years between cleans in Englewood usually means the second year is the one you're looking at. That's the climate doing what it does, not a failure on your part or on the last clean.
The aluminium frame has gone chalky and streaked. Does that clean up?
The streaks do. Those are growth and water staining running down from the top rail, and they come off at soft wash pressure with the rest of the enclosure. Chalking is the finish on the aluminium itself oxidising, and that's a different thing, so a wash won't restore it. Send a photo and you'll get told which one you have before anything is booked, rather than after.
Can the cage be done at the same time as the roof above it?
Yes, and the order matters. The roof goes first, because everything that comes off a roof lands on whatever is under it, and the cage below it gets cleaned after. Two surfaces, two pressures, a maximum of 70 PSI up top and 900 to 1200 PSI on the enclosure, one visit and one free quote. Send photos of both and it gets priced together.
Pool Cage & Deck Nearby
Based in North Port, working roughly 50 miles either side of I-75. Same services, same Florida weather, in every town on the list.
One Call Covers It
Related Services
Driveway and Paver Cleaning
Concrete, brick pavers, sidewalks and curbing cleaned at 3000 to 4000 PSI. Hard surfaces only, where real pressure is the right tool.
See Driveway & Pavers Roof Cleaning
Soft wash roof cleaning for shingle, tile and metal at a maximum of 70 PSI. Streaks and growth come off without putting high pressure on your roof components.
See Roof CleaningNeed pool cage & deck in Englewood?
Free estimates, no obligation. Send a photo and get a real number back, online, by text or over the phone.