Soft wash roof cleaning for shingle, tile and metal at a maximum of 70 PSI. Streaks and growth come off without putting high pressure on your roof components.
Black streaks down the shingle. Green growth creeping across the tile. On the Gulf Coast that isn't dirt, it's algae, and it's alive. It feeds on the roof surface, spreads every rainy season, and keeps going until something kills it. That's usually about when the HOA letter shows up, or the streaks become visible from the street.
We clean shingle, tile and metal roofs at a maximum of 70 PSI. That's garden hose pressure, from a battery operated pump. No loud machine on your roof, and no high pressure on your roof components. The cleaning is done by a surfactant based soap and degreaser mix matched to your roof surface, not by force.
And when the roof is done, the rinse gets the same care as the wash. The chemical gets diluted down until it stops acting on anything. Dilution is the solution. Family owned, licensed and insured, over a decade on the Gulf Coast. Every job is quoted free, online, by text or over the phone.
Shingle, tile and metal roofs cleaned at a maximum of 70 PSI
Battery operated pump at garden hose pressure. No loud machine on your roof
Surfactant mix matched to the surface, so the chemistry does the work
Nothing that lifts a tile or strips a shingle
Chemical diluted down afterward until it stops acting on anything
Free estimates, quoted online, by text or phone. Family owned, licensed and insured
The streaking on Florida roofs is a living growth, mostly algae, with mold and mildew alongside it in the shaded spots. It feeds on the roof surface and holds moisture against it. Heat and humidity keep it fed, which is why it starts on the north side and the shaded runs first, then spreads.
It doesn't wash off in the rain. Rain is how it travels. Left alone it keeps moving course by course until the whole roof reads black from the street. Killing the growth is the job. Knock the streaks off without killing what causes them and they're back by next season.
Cleaned at 70 PSI. That's Garden Hose Pressure
A pressure washer runs 3000 to 4000 PSI. That kind of pressure belongs on concrete, and concrete is the only place we point it. Your roof gets a maximum of 70 PSI from a battery operated pump. About what comes out of a garden hose. There's no loud machine sitting on your roof and no wand blasting at your tile.
The actual cleaning is chemistry. We apply a surfactant based soap and degreaser mix matched to the surface, then let it kill the growth and release its grip. A rinse at that same low pressure carries it off, streaks and all.
Max 70 PSI, battery operated pump, garden hose pressure
Surfactant mix matched to shingle, tile or metal
The growth is killed, not just knocked off the surface
No loud machine on the roof, nothing that lifts a tile
Shingle, Tile and Metal
Tile carries the heaviest visible growth, because the barrel profile holds shade and moisture on every course. Shingle shows it as long black streaks running toward the gutter. Metal shows it along panel lines and wherever water sits. Different look, same organism, same fix.
What changes is the mix, not the pressure. The blend is matched to the surface, so tile isn't treated like shingle and painted metal isn't treated like either. The 70 PSI maximum never moves. Low slope and flat roofs get the same treatment, and the flat roof in the photos below shows what that looks like.
Why We Never Blast a Roof
High pressure on a roof causes the exact damage you're afraid of. It lifts tiles and cracks them, strips the granules off shingle, and drives water up under the courses where it has no business being. A roof cleaned that way looks fine from the truck and fails early.
That's why the 70 PSI figure matters. It isn't a slogan, it's the pressure the pump physically runs at. Anyone can say soft wash. A number is harder to fudge.
Dilution Is the Solution
The fear that actually stops people booking a roof cleaning isn't the roof. It's the landscaping under it. Runoff from a roof wash ends up in the beds, and a strong mix left sitting there will burn whatever it lands on.
So the rinse gets the same care as the wash. When the roof is done, the chemical gets diluted down so far it stops acting on anything. Dilution is the solution. One thing on your side of the job: if you have irrigation around the house, run it before we arrive and for at least a week to 10 days after we leave, so nothing dies at the root. Your hedge shouldn't pay for your roof.
When to Clean, and How Long It Lasts
Most calls come in when the streaks show from the street, when the HOA sends a letter, or when a house is going on the market and the roof is dragging the listing photos down. Before painting is another good time. A clean roof changes how the whole house reads.
Results typically stay clean about a year. Heavy shade and overhanging oak bring the growth back faster, full sun holds it off longer. When it starts creeping back, call. We'll tell you straight whether it's time or whether it can wait a season.
Why People Call Mr. Pressure Cleaning
Matt answers his own phone, quotes every job free online, by text or over the phone, and shows up when he says he will. Family owned, based in North Port, over a decade on the Gulf Coast.
If it's black or green, we will make it clean. And your tile, your shingle and your landscaping will all still be intact when we leave.
Will pressure washing damage my shingles or lift my tiles?
We don't pressure wash roofs at all. Your roof gets a maximum of 70 PSI from a battery operated pump, which is garden hose pressure. Nothing lifts a tile, nothing strips shingle granules, and there's no machine roaring away up there. High pressure stays on the driveway, where it belongs.
Will the chemicals kill my plants?
No. The mix is matched to the surface, and when the roof is done we dilute the chemical down until it stops acting on anything. Dilution is the solution. If you have irrigation, run it before we arrive and for at least a week to 10 days after we leave, so nothing dies at the root.
What kinds of roofs do you clean?
Shingle, tile and metal, plus low slope and flat roofs. Same maximum of 70 PSI on all of them. The surfactant mix changes with the surface. The pressure doesn't.
How long does a roof cleaning last?
About a year is typical. Shade, overhanging trees and the north side bring growth back sooner, full sun holds longer. Some roofs need a maintenance clean to keep the mold from getting re-established. When you see it coming back, call and we'll tell you straight.
The HOA sent me a letter about my roof. Can you handle it?
It's one of the most common reasons people call. Send a photo of the roof, get a free quote back by text or phone, and one clean at 70 PSI takes off the streaks the letter is about. Deadlines on those letters vary, so don't sit on it.
How much does roof cleaning cost?
Every job is quoted free, online, by text or over the phone. Roof size, pitch and how far the growth has spread all move the number, so send a photo or two of the roof and Matt gives you a real price back. Nobody waits around for an appointment window, and there's no obligation either way.
Roof Cleaning By Area
Based in North Port, working roughly 50 miles either side of I-75.
Whole exterior soft wash at 900 to 1200 PSI. Stucco, siding, soffit, fascia and the outside of your gutters, with the chemical diluted down after the rinse.
A full clear out before the rainy season, so the water goes where it is supposed to go instead of down your wall. Free estimates by text, phone or online.
Before
Before
Before
After
